1. Panel
2. Raising and Lowering Your Desk
Just activate either the up or down button for parallel drive and the system will drive until the button
is released again or the system reaches end position.
3. How to Initialize Your Desk
The desk cannot drive up if it has not been initialized
If display:
error code E01.
How to initialize:
•
Press key and drive to the lowest position.
•
Hold the key until the desk stops completely.
•
Reactivate the key and hold the key until the desk stops completely.
•
Now the desk can drive up.
4. How to Store a Memory Position
Favorite positions, for example, for sitting and/or standing can be stored. Follow the procedure
shown in the text below.
How to initialize:
•
Drive to the height you wish to store.
•
Press S button and then the 1, 2, or 3 memory button.
•
The position has now been stored.
•
To recall your memory position, press the memory button until you reach the stored position.
5. Anti-Collison (Piezo)
For optimized safety against squeezing and blocking on a desk, an integrated sensor is built-in to
the FA Lifting Column. It minimizes the risk of damages on a desk caused by squeezing or blocking
of obstacles in up and down direction. Examples could be driving down into an office chair or into a
container or up into a windowsill. To a certain extent, the system also increases the personal safety,
but it does not comply with legislation describing personal safety.
DIGITAL HANDSET OPERATION
OPERATION INSTRUCTIONS
STAKS HA Benching
INSTRUCTION SHEET #1830828
PART #2584INS
•
& : Parallel up and down
•
1 Button: Memory 1
•
2 Button: Memory 2
•
3 Button: Memory 3
•
S Button: Store memory
130
25
