First Degree NEPTUNE Challenge AR, Owner'S Manual

Page: 4 / 23

Assembly Instructions:
Install rower seat onto seat rail,
with widest part of seat rearward.
CAUTION
Installing the seat incorrectly will result
in lack of data pickup during rowing.
Step 1
Turn seat rail over, and install the rear
rubber bumpstop using 2x M6x10mm
screws with beveled edge facing forward.
Step 2
Step 3
Using the M10x25mm bolt, 11x21x2T Washer and
Rear leg, install as shown. Once rear leg is tight-
ened, install the rear Rubber End Cap.
Rear Leg
Seat Rail
M10x25mm bolt and
11x21x2 washer
Rear Rubber
end cap