10
Tank Filling and Water Treatment
Open the rear upper Yellow Tank Plug and insert hose into tank (rotating the impeller slightly may be
necessary to allow the hose to pass), move the Tank Adjuster Handle to level 20 and begin filling. Do
not fill the tank higher than the level indicator on the front of the clear shell. A properly filled tank
holds approximately 8liters of water.
Do not under any circumstances put fingers into the tank. Use the
end of the hose to move the impeller should the need arise.
Warning:
Use a drop cloth for splash and
stain protection.
Caution: The rower is
heavy. Use two people
when draining the tank.
Note: the lower Black Tank Plug is
permanently sealed.
Yellow
Tank
Plug
Filling Hose and Funnel
Note: A large bucket is required for filling (Not included)
In areas where tap water quality is known to be poor, FDF recommends the use of distilled
water.
Draining the Fluid Tank:
When draining indoors, a suitable container capable of holding 8 liters of water is required.
Open the Yellow Tank Plug, and on a protective surface, turn the VX-3 on its side as
shown above. Once the rower is in this position, the tank can be easily drained.
Water Treatment Procedures:
1. Add Chlorine tablet.
2. Enough Chlorine Tablets are supplied for many
years of Water treatment. Add a chlorine Tablet
whenever the Water appears dirty or cloudy.
WARNING: Only use First Degree Fitness Supplied
Water treatment tablets.
Use a drop cloth under the tank when
filling the tank to avoid damage floor or
carpet
Caution:
Summary of Contents for VX-3 Fluid rower
Page 1: ...Owners Manual...
