4
Install the Rower Seat onto the Seat Rail
as shown, with seat indentation facing
rearward.
Indentation
Rower Seat
Seat Rail
Installing the Seat and Rear Leg to Seat Rail
Internal Seat Rail Bracket
Rear Leg
Mount Rear Leg as shown,
aligning the M8x15 bolts and
washers up through the Rear
Leg, the bottom of the Seat Rail
and threading into the Internal
Seat Rail Bracket as illustrated.
M8x15mm bolts/washers
Install Rubber End Cap
once Rear Leg assembly
is completed.
Next, install Rear Bumpstop on underside of
Seat Rail using 2x M6x10mm bolts. Beveled
edge must face forward.
Rower Seat
Underside of
Seat Rail
Beveled edge
M6x10mm Bolts
Rubber
Bumpstop
Rear Leg
M8x15mm Bolt
M8 Washer
Internal Seat Rail Bracket
Install front
M8x15mm bolt
and washer first
Rear Leg Assembly
Tip:
Summary of Contents for PacificChallenge AR
Page 1: ...Owners Manual...
