17
Tip:
Correct bungee tension is achieved when enough recoil is present
for the Rowing Handle to easily reach the front of the Rower Pulley Belt
Bracket at the far front of the frame. If the Rowing Handle will not reach
rearward to the end of the Seat Rail, the Bungee Cord is over-tightened
and will require adjustment.
Replacing the Bungee Shock Cord
Reinstall the Shock Cord through the Upper Frame, along the opposite side of Idle
Wheel, through the Mid Frame and Lower Bungee Pulleys and then tie off with
plastic tie wrap to correct tension. Replace Frame Plug
Bungee
Shock
Cord
Bungee Attachment
Point
Pull Bungee
through until
seated securely
