11
Assembly Instructions
STEP 7
Fine Tuning the Rower
15
The Vertical Seat Rail Tensioning Bolt is designed to hold the mid leg 3-5mm off the
ground when the Fluid Rower is unweighted, and just slightly touch the ground during a
rowing stroke.
Tighten the assembly until the Mid Leg begins to lift off of the ground as shown below.
Note: If excessive head shaking/hopping of the tank occurs during rowing, this indicates
the Vertical Seat Rail Tensioning Bolt being out of adjustment.
3-5mm off the floor is ideal
And with the Multi-Tool here
Adjust Vertical Frame Tensioning Bolt
here using the Allen Key here
Close up view of the
Vertical Seat Rail
Tensioning Bolt M10
Nylock location.
Tension the Vertical Seat
Rail Tensioning Bolt as
shown here.
