6
L-Pin
M10x25mm
bolt
M10 Nylock
nut
21x11x2 washer
Step 4:
Lower upper seat frame onto lower mainframe and secure using
1x M10x25mm bolt, 1x M10 Nylock nut, 3x 21x11x2 washers and L-pin.
Note:
Tighten the M10x25mm bolt, washers and Nylock until lightly snug
only. Over-tightening will prevent the seat from rotating. Use the L-pin to
tighten the upper seat frame once rotated into place.
E720 Assembly Instructions
M10 plastic
washer
Before installing the upper seat frame onto the
lower, use the supplied grease and apply liberally
between the two sliding surfaces
Summary of Contents for Fluid Cycle XT E720
Page 1: ...1 Owners Manual E720 ...
