11
Operation Instructions
Chain Tensioning Bolts: Allows for tightening the chain or adjustment from side to
side. Make sure when tightening only to adjust the same amount for both Bolts,
otherwise the sprocket will be misaligned.
Note: Tightening the right Bolt only will pull the right side of the crank assembly
toward you, tightening the left will pull the left side toward you. Use this feature to
realign the rear with the front sprocket if needed or when changing to a new chain.
L-Pin: Loosen when
rotating the control
arm and tighten (snug
only) once the desired
position has been
reached.
Crank Arm Bolts: Loosen all 8
Bolts slightly before ad-
justing/tightening chain.
Inspection plate: Open to
check chain tension.
Warning: Do not check
chain tension by hand!
The E720A Pedal:
This patented design
allows for usage in
both the recumbent
position and for
sitting/standing
upper body workouts.
T
-Pin: The T-pin locks the
control arm in any one of 72
different positions throughout
its 360 degree range of motion.
Pull up the T-pin to allow the
control arm to rotate while
supporting the control arm
with the other hand.
E720 Control Arm
Summary of Contents for E720A
Page 1: ...E720A USER GUIDE ...
Page 2: ...2 ...
