First Alert ReadyGuard Touch, User Manual

Page: 63 / 96

– 63 –
USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
WiFi Configuration
Manually Configure Access Point
WiFi Config Date Time
Ready To Arm
Events
Back
Reminders
Keypad Users
5100-100-006-V0
Slide Show
Test
1. At the Master User screen select the WiFi
Config icon. The system displays the WiFi
options screen.
5100-100-032-V0
Scan Access Points
Manual Configure AP
Ready To Arm
2. Select the “ Manually Configure AP ” button to
view the available networks. The WiFi
enrollment screen is displayed.
5100-100-086-V0
System Programming...
Network Type
Infrastructure
Security
WPA1
Key
* * * *
Join Save
SSID Name
Toms_net
3. Select the “ SSID Name ” button and enter
Network name on the displayed keypad.
4. Select the “ Security ” button and select from
“ Open ” , “ WPA1, “ WPA2 ” and “ WEP ” . The
network information is displayed. If a
password is required, select the
“ Key ” button
and enter the password.
Note: When configuring for WEP encryption key on the
access point, always use hexa-decimal type as
the input method on the panel. The input key
should contain characters such as 0-9 and A-F.
4. Select the “ Join ” button. A confirmation screen
will be displayed. Select “ OK ” , then select
“ Save ” to confirm the selection.
5. Select the “
2
” button as required to return to
the Master User screen.