Chime and Status Features
Voice Chime
You can set the keypad(s) to announce faulted (opened) entry/exit or perimeter zones whenever
the control panel’s Chime mode is on by turning on the Voice Chime mode.
To turn Voice Chime On/Off:Press the
#
FUNCTION
+
0
VOICE
+
2
AWAY
VOLUME
+ 4
MAX
keys.
When on, any faulted zone(s) causes a voice status annunciation, chime,
and display. When off, the sounder will still provide chime when the
control’s Chime mode is on.
Voice Status
You can use the STATUS [
✱
] key to announce system status and display any system and/or zone
faults (if they exist) by first turning on the Voice Chime mode (see above). When Voice Chime
mode is on, pressing the STATUS [
✱
] key displays and announces current system status and
zone descriptors (programmed by your installer) of faulted zones. If zone descriptors are not
programmed, the respective faulted zone numbers are announced.
To Announce Status: Press the
#
FUNCTION
+
0
VOICE
+
✱
READY
STATUS
keys once.
(Voice Chime mode
must be “on”; see above.)
The respective system status is announced (e.g. “Disarmed Ready to
Arm” or “Disarmed Not Ready to Arm”).
Note: Status cannot be announced during the Exit Delay period.
To Announce Faults: Press the
✱
READY
STATUS
key a second time within 10 seconds of the first
press.
Up to 3 faulted zones are announced with their zone descriptors, if
programmed. If zone descriptors are not programmed, the respective
zone numbers are announced.
R
149 Eileen Way, Syosset, N.Y. 11791
Copyright
2001 PITTWAY CORPORATION
¬.8* l
K0022-2UG 8/02
