– 10 –
Silencing and Resetting a Trouble Indication
To silence the control and keypad buzzers:
Press the control's SILENCE/RESET button or enter your User Code, +
the OFF key.
The keypad's LCD will display the number of the zone in trouble as a Memory indication.
To reset the keypad trouble display:
First have the cause of the trouble condition
corrected, and then:
Press the SILENCE/RESET button again or re-enter your User Code,
followed by the OFF key.
ACTIVATING A FIRE DRILL TEST
Using the # + 6 + 9 Keys
This feature can be activated only while no alarm, supervisory, or trouble
condition is present and only User Number 2's code can activate this test.
This test requires that a keypad and external fire alarm sounder be installed.
The test activates the external fire alarm sounders for the purpose of conducting a
fire alarm drill. Your system will remain operational for fire alarm signaling while
this test is active (although no message will be sent to the central station unless an
actual alarm occurs).
To activate the Fire Drill Test enter User Number 2's code, then press the
# + 6 + 9 keys.
The keypad LCD will display "FIRE DRILL ACTIVE (Alpha) or "TEST dF" (Fixed-
Word) and the external fire alarm sounders will produce either a steady or a pulsing
sound while this test is active, depending on what your installer selected.
ALPHA
FIXED-WORD
To terminate the Fire Drill Test enter any User Code, followed by the OFF key.
Your system will also automatically terminate this test if an alarm, supervisory or
trouble condition is detected while it is activated.
