1
2
Overview of Your Safe
Opening Your Safe For The First Time
INDEX
Overview of Your Safe .................................................................................................1
Opening Your Safe for the First Time .......................................................................2
Programming a Personal Passcode ..........................................................................3
Safe Care and Maintenance .......................................................................................4
Consumer Affairs .........................................................................................................5
Safe Identification Record .........................................................................................5
Ordering Replacement Keys .....................................................................................6
Limited Warranty .........................................................................................................6
FOR YOUR PROTECTION
a
Do not remove the serial number tag from the safe.
a
Store emergency override keys away from safe, NEVER INSIDE.
a
Record all safe identification numbers on Safe Identification Record on page 5.
a
Save this manual and NEVER keep it inside the safe.
OVERVIEW OF YOUR SAFE
Congratulations!
Your new First Alert® Safe will provide years of safe and secure protection for your
valuables, important documents and other personal items. All First Alert® Safes are
designed and built using the highest manufacturing standards to ensure maximum
user satisfaction under a variety of conditions. With proper care, your First Alert® Safe
will provide peace of mind for many years to come.
MANU
AL
PACKAGE CONTENTS
1 First Alert® Safe
1 Operation &
Installation Guide
2 Emergency
Override Keys
1 Steel Cable
2 AA Batteries
OPENING YOUR SAFE FOR THE FIRST TIME
BATTERIES AND EMERGENCY OVERRIDE KEYS
Remove two (2) AA batteries and two (2) Emergency Override Keys. They are located
in the protective foam insert at the top of the box.
1
Locate the key lock on the front of the safe. Remove the protective cover.
2
Insert the key into the lock on the front of the safe.
3
Turn the key counterclockwise to unlock and lift the lid.
NOTE: TURN THE KEY CLOCKWISE TO REMOVE THE KEY FROM THE LOCK.
4
Slide the battery compartment open.
5
Install two (2) AA batteries. Make sure the batteries are installed in the proper
direction as indicated in the battery compartment.
6
Once the power connects, the light will blink red and green three (3) times.
7
Slide the cover back into place.
NOTE: WHEN THE BATTERY IS LOW, THE LIGHT WILL BLINK YELLOW WITH THE
PRESS OF A BUTTON. REPLACE WITH NEW AA BATTERIES IMMEDIATELY.
TESTING THE PASSCODE
1
Enter the factory pre-set code as follows: 1-2-3-4. The red light will blink with
each press of a button.
2
After properly entering the entire sequence, the green light will turn on for 2
seconds and the lock will click.
3
Lift the lid to open the safe.
