2
Programming Preparation
11
Home and Office Security Safes
Notes
Step 2. Open Safe with Override Key (square top)
You will need access to the inside of the safe door to begin
programming. You must use the Emergency Override Key
(square top) to open the door for the first time.
1. Insert the Emergency Override Key (square top) in the
lock, turn to the left (counterclockwise) and pull the door open.
Step 1. Installing Batteries
The digital keypad is powered by 4 “AA” batteries which
must be installed before you can begin programming
your personal code. For your convenience, we have
provided you with 4 “AA” batteries.
For best results
and depending on use, we recommend replacing the
batteries at least once a year.
1. Locate battery compartment to the right of the
digital keypad.
2. To open the compartment, press firmly in on the
battery cover and slide it to the right for removal.
3. Install 4 new “AA” batteries in the battery
compartment. Make sure they are installed in the
correct direction as marked on the inside of the
battery compartment.
4. Once the batteries are installed properly, replace
the cover by sliding it back on from the left.
Important: BATTERY REMOVAL
If the batteries are removed or fail, the
keypad memory will NOT be erased.
Important: TURN OVERRIDE KEY TO LEFT ONLY
When using the Emergency Override Key, you must
ONLY TURN IT TO THE LEFT. Turning it to the right
may cause key to become stuck in the cylinder and
may cause damage to the lock.
BATTERY
COMPARTMENT
