Store and Share your Digital Creations
Quick Install - SeriTek/Q6G or SeriTek/6G2+2 in ThunderTek/PX
I. Package Contents
Four
Rubber
Feet
Two
Screws
Secure
PCBA to
Posts
ThunderTek/PX2+2
Includes Two
Posts
Two
Screws
Secure
Posts to
Housing
Screws
Secure
PCIe to
Housing
ThunderTek/PX-
Q6G includes
SeriTek/Q6G
ThunderTek/PX2+2
includes
SeriTek/6G2+2
II.
Install SeriTek/Q6G in ThunderTek/PX
1.
Mount Rubber Feet in suggested locations.
2.
Remove Top Housing:
Remove three screws on each side of
ThunderTek/PX
3. Loosen screw and remove PCI Mounting Tab
4. Install SeriTek/Q6G Card:
- Insert adapter bracket into PCIe Tab Slot and
push Gold Teeth into PCIe slot
- Gently press PCIe adapter to verify card is
firmly seated in PCIe slot
Note: Hold the PCIe card by its edges only. Do NOT
touch Gold Teeth or any components on the card.
5. Reinstall PCI Mounting Tab
- Position & Place PCI Mounting Tab into
housing. Verify both holes align properly
- Tighten screw to secure the PCI Mounting Tab
to housing
- Tighten screw to secure Card to Mounting Tab
6. Reinstall Top Housing
-
Attach Top Cover and secure with six screws
1
1
1
1
2
3
2
2
PCI Mounting
Tab
PCI Mounting
Tab
Card Firmly Seated
4
Tighten Screw to
Secure Tab
Tighten Screw to
Secure Adapter
5
