SeriTek/1V4 Specifications
General System
Hardware
Requirements
PCI based Power Macintosh with available PCI
expansion slot
PCI-X 1.0a compliant 64-bit at 133/100/ 66MHz bus
speeds. Backward compatible with standard 32/64-
bit PCI at 33MHz and 66MHz bus speeds.
Operating Systems
Supported
Mac OS 9.xx
Mac OS X version 10.1.5 or later (works best with
10.2 or later)
Bus Types
32/64 bit, 33/66MHz PCI
133/100/66MHz PCI-X
Compliant with PCI bus version 2.2
Compliant with PCI-X bus version 1.0a
Internal Connectors
4-port internal Serial ATA (SATA) interface
connectors support up to 4 internal hard drives
Drive Types
Supported
Serial ATA hard drive
Backward compatible with Ultra DMA 133/100/66
hard drives*
ATAPI Device
Support
Yes*
Data Transfer
Rates
Up to 150 MBytes/second or 1.5Gbits/second burst
data transfer rate
Drive Modes
Supported
Serial ATA
UltraDMA modes 6/5/4/3/2/1/0
Advanced Data
Features
Fully compliant with Serial ATA 1.0a specification
Bus Mastering off-loads data I/O handling from CPU
Complete 32-bit CRC error checking, for all bits
transmitted (command, data, and status), offers
enhanced data protection for high-speed Serial ATA
drives
Dual independent data channels allows for separate
device timings
Automatically identifies and configures drive types*
Automatically detects and supports devices utilizing
many transfer modes including UltraDMA
6/5/43/2/1/0
Onboard Flash
ROM
Allows easy upgrades to the latest firmware
Cables Supported
7-pin SATA cable
Warranty
Two year limited parts & labor
Physical
Dimensions
163mm(L) x 1.6mm(W) x 64.4mm(H) (not including
bracket)
Power
Requirements
5V ± 5%
Environmental
Temperature:
Operating: +5°C to +55°C
Non-Operating: -25°C to +70°C
Relative humidity:
Operating: 20% to 80%
Non-Operating: 15% to 90%
EMC Compliance
EN55022/1998, EN55024/1998 (European
Community)
FCC Part 15 Class B (US)
* IDE to Serial ATA converter module required for Parallel ATA and Ultra ATA133/100/66 drives
