www.FireWare.nl
FireWare Pandora
EN
Manual
FireWare Pandora
15
Material Pandora’s Box
The casing is made of stainless steel (RVS 340). The electronics are fully encased to prevent
(moisture) interference. The device is protected by a plastic box that provides room for storage of
accessories or to fit a Cirrus battery-operated smoke generator.
The speaker (FR10WP – 4 Ohm) is designed in a fully encased plastic conus and a plastic chassis
and grille. The speaker is splash-proof and corrosion and salt-water-resistant as a result of the
encased magnet and silicon coated wiring.
The Pandora’s Box’s design includes two powerful LED flame luminaires, a volume switch, a
speaker, a connector for a smoke generator and a remote control. The volume can be adjusted on
the device’s casing. The included remote is used to select the sounds. Prior to the set’s first use,
both the box and the remote control need to be fully charged.
It takes approximately 3 hours to charge the device up to 80%. The battery of a fully charged Box
will last for about 6 hours.
A new battery pack for the Pandora’s Box must be installed by FireWare. The remote’s battery
(CR2032) is replaceable by the user and must be disposed of according to local law and regula-
tions.
Turn on the Pandora’s Box using the on/off switch (A) and adjust the volume with the volume
switch (B). First select a moderate volume. Select one or more options from the buttons 1
through 8 on the remote to activate the sound effects, which represent, from left to right:
1.
Fire sound effect
2.
Smoke trigger external smoke generator
3. Collapse
4.
Gas leakage
5.
Fluid leakage
6. Explosion
7.
Woman sobbing
8.
Baby crying
Upon selecting the sound of fire (1), the lights (B.a and B.b – LED-luminaires) and sound (C-
speaker) on the Pandora’s Box are automatically activated. Use the push buttons (B.a or B.b)
placed next to the LED to set a flashing rhythm. Add a sobbing sound or the sound of an explo
-
sion to the fire sounds. Every sound can be activated and deactivated on the remote by one push
of the button.
Connecting a smoke generator
Connect your FireWare Nimbo, Cumulus or Stratus to the Pandora’s Box. The connector (E) is on
the top right-hand-side of the Pandora’s Box. Then connect the smoke generator to the power
supply. Or simply use the battery-operated smoke generator, the FireWare Cirrus, whenever there
is no power supply in the vicinity. Now you’re all set to add smoke to your scenario by using the
Pandora’s remote.
Audio and optical effects
The audio and optical effects of the Pandora’s Box are activated via the included remote. The
volume of the sound effects is only adjustable on the Pandora’s Box itself, using the volume switch
(D).
4.
Use
