17
Ammeter: Displays the actual current between the charger and the battery in amps.
The battery: The battery will be red if it is in failure and green otherwise. The data shows the actual voltage of the battery
and the charger in volts.
Engine Speed icon: Will be green when running, read when in overspeed condition and gray otherwise.
Low oil pressure icon: Red when a low-oil pressure alarm condition is active, gray otherwise. When cranking only, the
status follows the engine output to allow testing the circuit continuity.
High engine tempetaure icon: Red when a high engine temperature alarm condition is active, gray otherwise.
The pressure gauge: It allows for a precise reading of the actual system pressure. The cut-in and cut-out are represented by
a red and green triangle on the gage, allowing a quick comparison between the actual pressure and the set points.
HOA Indicator: Displays the current mode. Hand, Off, Automatic.
Shutdown mode: Displays if the shutdown on this controller is Automatic or Manual.
Screen Saver
After 5 minutes of inactivity on the MarkIII, the screen will dim it's brightness to 25%. After 10 minutes of inactivity on the
MarkIII, the “Black Screen” screen saver will activate. Its goal is to expand the lifetime of the LCD screen. The screen
saver will be instantly deactivated if the engine is running or if an alarm is activated. To manually deactivate it, simply
touch the screen or any membrane button. After deactivation, the screen saver will always redirect to the “Home” page. It
will also log off any user by resetting the security level to 0 and save any new modifications to the settings.
Alarms (Menu)
Configuration > Advanced > Alarms
For full alarm list and information consult the full manual,
Digitally available, see “Download manual” in section 9
Config (Menu)
Config
For additional information about configuration please consult the full manual,
Digitally available, see “Download
manual” in section 9
History (Menu)
History
Alarms
Configuration
History