PB42 CF BonFyre
(sku# 94500772)
Page 2 of
10
17602206 — 5/3/21
© Travis Industries, Inc.
Ember-Glo™ Glass and Ember Material Installation (GSR2 ONLY)
Ember bed Glass Installation
The Ember-Glo™ lights come standard on the GSR2 units. There is an optional accessory for GSB2 or MV units. If the
upgrade kit is not used for the GSB2 or MV units, you may skip this section and proceed to Ember Installation.
Make sure the ember skirt is in place. The skirt hooks over the front of the ember platform and slopes outward
toward the glass. The skirt helps keep the glass and ember material from falling off the platform when the glass
is removed.
Locate the perforations in front of the log grate.
Place a thick layer of the ember glass over the perforations making sure to cover all of the holes completely.
Lightly dress the ember glass with the black touch-up paint provided. Check the appearance with the lights on
and add additional paint, as needed, for a realistic glowing ember appearance.
NOTE:
If power is supplied
to the fireplace it can help
to turn the lights on while
painting so you can
determine an appropriate
amount of paint for a
realistic ember appearance.
NOTE:
We recommend
that you use a piece of
paper, cardboard as a
shield to mask the log grate
and burner from overspray
(see below).
Ember Material Installation
(GSR2 ONLY)
Once the ember glass installation is complete, place
a generous amount of ember material on the firebox
floor on either side of the firebox. Completely cover
any visible metal on the firebox floor.
NOTE:
Make sure no ember material is placed directly on
the burner.
HINT:
Add a few randomly placed ember chunks over the
ember bed glass to produce a more realistic appearance.
