Firenzi FWM 1010, Instruction Booklet

Page: 7 / 28

7
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 5 KG OF WHITE COTTON AT 95°C
Suppose you have 5 kg of laundry to wash. It is white
cotton and is suitable for high temperature washing.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
.
If you wish to carry out the prewash, pour detergent into
the compartment marked
.
P0006
P0004
3. Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
4. Select the required option
Depress RINSE HOLD or QUICK WASH
button, if your laundry is lightly soiled.
5. Select the required programme
Push the programme selector dial to pop it out and turn
it
clockwise to the programme B or A (if you wish to
perform a prewash).
P0429S
B
PROGRAMMES
QUICK
WASH
RINSE
HOLD
HALF
LOAD ON/OFF
P0005