17
2. Push the appliance into place. The plug socket
necessary for connection of the appliance to the
electricity supply should be positioned, so that the
plug is not placed in the recess.
3. To adjust the height proceed as follows:
-
Loosen or tighten the two front feet.
-
The rear feet are adjusted by turning the screw in
the front kick plate to the left or right.
5. Screw appliance into place and retain the cabinet
with screws through the securing brackets into the
worktop or adjacent woodwork as necessary.
5
4. If necessary, pads are supplied for the rear feet to
make sliding the appliance in and out of the recess
easier. To fit the pads, press them onto the rear
feet.
If required, the dimensions of these pads can be
reduced by breaking them where marked.
3
1
2
B
N.B.
The joint cover (B) is to be assembled after
having installed the appliance in the recess.
II52
596
555
max
Li89
+
-
2
4
115
°
Summary of Contents for FRF 120
Page 1: ...2222685 21 REFRIGERATOR FRF 120 INSTRUCTION BOOKLET t...
Page 15: ...15 Inner door reversal 180...
Page 20: ...923 453 683...
