FG-BD100 Programming Devices
（
By DIP Switch
）
As shown in the figure of the shell base. Use
DIP switch(SW2) to set the parameter set you
want (see table on the right).
Note
：
①
“1” means to Enable/Disable
；
if you want adjust parameter by DIP Switch
，
you
should turn “1” to ON state first
；
②
The DIP switch has a higher priority than the handheld encoding, which means
that
if the DIP SWITHCH "1" is "ON", TX7932 connection to S1 and S2 cannot be
used at
this time.
③
“2”and “3” used to adjust span parameter;
④
“4”and “5” used to adjust sensitivity parameter;
⑤
“6”Reserved for future use.
FIREGUARD UK Technology Copyright ©2021, All right reserved.
