9.750”
3.750”
Cut Out Detail
Install the vents on opposite sides of the enclosure to ensure cross flow ventilation. Cross flow ventilation is necessary to
provide free flowing air to assist in keeping the enclosure dry and cool during operation of a fire pit.
Cut an rectangular opening 9.75” x 3.75” into on opposite sides of the enclosure. Center the vent over the cut out area
ensuring the vent slots are clear of any obstruction. Mark the holes with a pencil or marker. Drill six ¼” clearance holes,
place the vent centered over the opening, insert a screw into the vent and enclosure at the same time and secure with
washer and nut on the inside. Repeat the process until all six screws are securing each vent into place on both sides of
the enclosure.
Fig. 2
Cutting hole in enclosure and installing vent.
FOR TECHNICAL SERVICE, CALL:
Firegear Outdoors
9230 Conservation Way
Fort Wayne, IN 46809
For Sales: (888) 672-8929
WEB SITE
: www.firegearoutdoors.com
(855) 498-8324
Vent Kit - 6x12
2-8-16 Page 2