REV. A Page 3
FPB Pro Series Fire Pits with AWS System
All media (i.e. lava rock, lava stones, lava boulders and fire glass) has the potential of
thermal spalling. This is a process that may occur when media is wet and moisture gets
trapped inside of the material due to rapid temperature differences. When this happens
the media has the potential to crack or “pop” outside the fire feature.
WE HIGHLY RECOMMEND COVERING ALL FIRE FEATURES WHEN NOT IN USE
The use of a cover can lessen the impact of thermal spalling; however, heavy rains, high
humidity and the presence of moisture may still cause the media to pop.
ALWAYS USE CAUTION WHEN USING THE FIRE FEATURE
Extra caution should be taken when lighting a fire feature when heavy rains, high humidity
and moisture are present. Light the fire feature; leave the area allowing any moisture in
the media to dissipate. We strongly recommend that during this drying out time that you
monitor the fire feature from a distance. This drying out period should be no less than 30
minutes. Continue monitoring the flame from distance to ensure that all popping has
ceased before fully enjoying the fire.
CAUTION
TABLE OF CONTENTS
Specifications
4
Preparing a Non Combustible Structure
5
Ventilation; Hard Piping
5
Gas Pipe Sizing Chart
6
Carton Contents - Single Fire Feature
7
Pre-Installation Check List for Single Installation
8
Power Supply Location for Single Installation
9
Burner Pan & Enclosure Preparation
10
Wiring Diagrams
10
Media Installation
11
Operating- Lighting Instructions
12
Replacements Parts
13
Replacement Parts List & Valve Reference
14
Trouble Shooting
15-17
Optional Accessories
18
Warranty
19
Congratulations!
You have just purchased a Firegear Outdoors “Pro Series” fire pit that includes
a 304 Stainless Steel burner pan with a Brass Burner. The Brass Burner comes in a 21-inch model.
Each burner leg incorporates individual injectors that take the place of a standard main burner orifice.
Each burner is unique in the fact that the 21-inch burner has four (4) injectors per leg. These injectors
provide a unique flame pattern that differs from a typical steel burner.
