p14
SplashyBig User Manual
11.2 Assembling SplashyBig
• We highly recommend that you
complete a ‘dry run’ with your
child in SplashyBig whilst wearing
light clothing to ensure correct
placement of harness and
bumper supports.
• Make sure your bath is clean
and free from any residue before
placing the floorsitter into the bath.
• Your SplashyBig
MUST be assembled
BEFORE filling the bath with water.
We recommend you fill the bath with
a mixture of hot and cold water to
prevent damage to SplashyBig.
• See section 11.6.1 for some guidance
on how to position the recline arm
on the SplashyBig.
Continued
11.2.1 Placement of
the floorsitter
The floorsitter should always be
placed on a firm, solid, static surface.
When placing the floorsitter on your
chosen surface, it’s vital that all
rubber feet are in contact with
the surface. Whilst the stabiliser is not
needed when using the SplashyBig in
the bathtub, it is important to ensure it
is fully rotated to its, “locked”, position
when outside the bathtub.
