Assembling Process
Step1: Assemble the bracket. (
○
3 ,
○
6 .
○
7 ,
○
8 )
Do not tighten the four M6*10screws
○
3
, reserve 2-3mm of gap for step 4.
Step 2:Install the bracket on the back of the heater.
Adjust the four sliders which inside the track to the middle of the heater .Fix
the bracket which you have assemble in the step 1 with four M6*18
screws
○
9 , tighten them with
‘L ‘hexagonal wrench
○
12
。
Step 3:
Fix the part 1
○
1 on the wall, tighten the four nuts (a part of
explosive bolt M6*50)
○
2 with M6 spanner
○
11 .
Step 4:
Put the heater on the wall, slide it into the part 1
○
1 .
Step 5:
Please tighten the M6*10securityscrew
○
5 toavoid accidents
