5
Quick Start Guide
Charge the Battery
The battery charges when flyPhone is connected to your computer.
Important
: You must load the flyKicks software on your computer
before charging the battery.
1. Turn on your computer.
2. Put the small USB connector (1) into the
connect port (2) on flyPhone.
3. Put the large USB connector into a USB
port on your computer.
4. Turn on flyPhone.
Note: If the phone will not turn on,
leave it connected to the computer for 30 minutes, then
disconnect the phone. Turn it on, and then reconnect it
to the computer.
5. Look at the display area:
Battery is charging
No action required.
Battery is charged
Disconnect and use flyPhone.
Unable to Charge
Disconnect and try again.
It will take about 3 hours for the battery to charge the first time.
Recharge the battery when the battery icon in the display area is
at 1 bar or less.
•
•
•
1
2
1
2
Summary of Contents for flyPhone
Page 1: ...flyPhone Quickstart Guide Refer to the label below during the activation of your flyPhone...
Page 42: ......
Page 43: ......
