background image

Assembling   

 

1)  Fix the heater on the pole by using the provided one piece of M6*10mm 

Screw and fix tightly.   

 

                   

 

 

 

1.

 

Mount the heater outside or in a large open area and well away from 
any obstructions such as branches or where the heater is near any 
objects that can be affected by heat, such as furniture, curtains or 
other inflammable objects (minimum distance 1 meter). 

2.

 

Do not use near bath tubs, wash areas or swimming pools. 

3.

 

Do not use in unventilated areas 

4.

 

Do not use where gas, petrol, paint or other inflammable goods are 
stored.     

5.

 

Do  not  push  any  items  through,  obstruct  or  cover  the  grill  of  the 
heater head. 

6.

 

Do not position immediately above or below an electrical socket.   

7.

 

Do not move when connected to an electrical supply and always wait 

for the patio heater to cool down before storing away. 

8.

 

Do not touch the heater head when in use. 

9.

 

Do not leave turned on and unattended especially when children and 
or animals are in the vicinity.   

10.

 

The indication of the different positions of switches shall be visible 
from a distance of 1M. 

11.

 

  The  Marking  concerning  covering  shall  be  visible  after  the  heater 
has been installed. It shall not be placed on the back of heaters. 

12.

 

  The unit must be placed with the clearance of 180cm to the floor 
and 50cm to the ceiling. 

13.

 

The  unit  must  be  correctly  installed  according  to  the  instructions. 
Make sure the head is at least 1.8m from the floor. 

14.

 

The unit must be securely placed on a vertical and flat wall. 

15.

 

The unit is at high temperature during operation. It keeps hot for a 
period after shut down. Potential danger would occur when touching 
it during this period. 

16.

 

Don’t place the unit closed to curtain and/or other flammable objects. 
Otherwise there will be a danger of catching fire. 

17.

 

Don’t cover the unit with anything during operation or a short time 
after it’s shut down. 

18.

 

Don’t wrap the power supply cord on the unit.     

19.

 

The unit must be handled with care, and avoid vibration or hitting. 

20.

 

The unit must be securely grounded during operation. 

21.

 

If  the  unit  gets  damaged,  it  must  be  repaired  by  professional 
electricians. 

22.

 

When  the  power  supply  cord  is  damaged,  it  must  be  replaced  by 
authorized agent or other professional people to avoid danger. 

23.

 

The unit must not be positioned under a socket. 

24.

 

When assembling, keep clear from any board or flammable material. 

25.

 

The unit must be supervised by adults if it’s used by a child. 

26.

 

It is not safe to install the unit by a swimming pool, in a bathroom or 

Summary of Contents for OL2801






Reviews: