STEP 1
STEP 2
Before cooking with your FireDisc
®
, be sure to read these
instructions. And be sure to remove all labels, wash the disc
and season the disc.
ASSEMBLY
Your FireDisc
®
cooker comes fully assembled but does
require that you screw the regulator into the burner
assembly. Be sure the regulator runs through the hole
in the stand prior to insertion into the burner. The threads
are pre-coated with Teflon pipe tape.
SET-UP
Step 1:
The FireDisc
®
stand consists of two sections that nest
together. The section with the burner drops into the other
section to form an “X.” The square-in-square assembly
serves to keep the stand very stable.
Step 2:
Place the disc itself onto the top of the stand where
it sets in place atop four supports. TIP: If the disc does not
ride on all four supports, adjust/bend the legs in and out
as needed. This also helps to level your FireDisc
®
when
on uneven ground.
NOTE:
Make sure all labels are removed prior
to seasoning or cooking.
HOW TO USE YOUR FIREDISC
®
COOKER
4
Summary of Contents for TCGFD22HRR
Page 1: ......
