background image

 

RF 

- Range: 

700’

 

open field, 100' minimum from base station depending on base 

station mounting position on the fire or emergency truck. 

-  Digital encoding for secured communications. 
-  Interference free communications for up to 40 headsets operating in close 

proximity. 

-  Immunity to interference from other communications devices operating in the 

entire frequency spectrum from 30 MHz – 18 GHz.

 

FCC/IC Compliance 

This device complies with FCC Part 15 Rules and IC RSS-213 Rules. Operation of 
this is subject to the following two conditions: 

1.  This device may not cause harmful interference. 
2.  This device must accept any interference that may be received, including 

interference that may cause undesired operation. 

FCC/IC RF Exposure Warning 

-  This product complies with FCC radiation exposure limits set forth for an 

uncontrolled environment. 

-  This product may not be collocated or operated in conjunction with any other 

antenna or transmitter. 

-  This product has been tested and meets the FCC RF exposure guidelines. 

Max. SAR is 0.003 W/kg. 

Changes or modifications not expressly approved by Firecom can void the user’s 
authority to operate the equipment. 

Power 

-  3.7V rechargeable lithium ion battery 
-  8-10 hours of talk time 
-  Cycle life: 500 cycles minimum 
-  Over voltage, under voltage, over current and over temperature protection. 
-  Charge source: 12V nominal (11-16v), 0.25A minimum 
-  Charge time: 3 hours max at 12V from deeply discharged state  

Environmental  

- Operating 

temperature -10 to +70°C 

- Storage 

temperature -25 to +85°C 

-  Meets standards SAE J1455 and J1113 
-  Chemical resistance, corrosion, and humidity per MIL-STD-810 

Package Contents  

BP5-10 Belt Pack: P/N 107-0203-00 

-  User’s manual P/N 600-3008-00 
-  Charger cable P/N 420-0048-00 w/ 2.1mm plug 
- Power 

adapter/charger,110VAC 

to 12VDC, 500mA  P/N 321-0007-00 

-  Belt Pack Pouch 540-0057-00 

Summary of Contents for BP5-10









Reviews: