Display messages
ER01 – PAD, ER08 – Flash error, ER10 – Comms error
Resolution:
a. Remove the pillow pad from the cradle.
b. Remove all 4 batteries from the unit.
c. After 20 seconds re-insert the batteries.
d. Perform a self test by pressing
MUTE/SNOOZE.
ER02 – Motor jam
Resolution:
Remove the pillow pad from the cradle and hold down
MUTE/SNOOZE
until
‘TEST’
is shown in the screen. During the test:
a. ‘
TEST’
should be shown on the screen.
b. Both strobes should be flashing.
c. There should be a continuous bleep.
d. The status light should flash
GREEN
once every 15 seconds.
e. The pillow pad should vibrate.
After 10 seconds, the test should stop and:
a. The screen should show the time.
b. Both strobes should stop.
c. The bleeping should stop.
d. The status light should flash
GREEN
once every 15 seconds.
Page 12
