①
LED
②
Power / Shutter
③
Rear Cap
④
WiFi Off / WiFi On
⑤
USB
⑥
MicroSD Card Slot
⑦
Battery
⑧
Battery Charging LED
INITIAL SET UP
1. Make sure the Fire Cam 4K is OFF before adding or removing the memory card.
2. Unscrew the rear cap located at the back of the Fire Cam 4K.
3. A CLASS 6 OR 10 MICRO SDHC SD CARD IS REQUIRED. Install the SD memory card
into the rear slot.
To insert the micro SD card, slide the micro SD card into the card slot on the back of the Fire
Cam 4K with the card label facing down. The micro SD card will click into place once it is
inserted. Then replace the rear cap.
4. If no micro SD memory is inserted in the Fire Cam 4K, the LED on top of the camera will
blink fast.
5. When using a micro SD memory card in the Fire Cam 4K, there should be no data from other
devices on the card. If you are using a micro SD memory
card for the first time in the Fire Cam 4K, first you should format the card in your computer.
An easy way to format on a PC or MAC is to download the FREE SD
Formatter at:
https://www.sdcard.org/downloads/formatter_4/
WATER RESISTANT AUDIO CAP (WITH HOLE)
is used for standard firefighting conditions
and enables the camera to be water resistant but NOT waterproof underwater. The hole allows
audio to enter the unit for recording.
WATERPROOF CAP (WITH NO HOLE / NO AUDIO)
is used for heavy water conditions which
can submerge the camera. You will need to use 2 O-Rings and add some silicon grease from
time to time, especially before using underwater. Make sure the rear WATERPROOF CAP (no
hole) is firmly closed.
Summary of Contents for 1080 WIFI
Page 1: ...Fire Cam 4K User Manual...
