FireBrick FB6602, User Manual

Page: 137 / 152

FireBrick FB6602 V1.24.093
configuration objects
122
graph string - Graph name
hdlc boolean true Send HDLC header (FF03) on all PPP
frames
hello-interval unsignedByte 60 Interval between HELLO messages
hostname string - Hostname quoted on incoming tunnel
icmp-ppp boolean false Use PPP endpoint for ICMP
ipv6ep IP4Addr - Local end IPv4 for IPv6 tunnels
lcp-mru-fix boolean false Restart LCP if RAS negotiated MRU is too
high
lcp-rate unsignedByte 1 LCP interval (seconds)
lcp-timeout unsignedByte 10 LCP timeout (seconds)
log string Not logging Log events
log-debug string Not logging Log debug
log-error string Log as event Log errors
mtu (unsignedShort
576-1600) mtu - Default MTU for sessions in this tunnel
name string - Name
open-timeout unsignedByte 60 Interval before OPEN considered failed
payload-table (unsignedByte 0-99)
routetable 0 Routing table number for payload traffic
pppdns1 IP4Addr - PPP DNS1 IPv4 default
pppdns2 IP4Addr - PPP DNS2 IPv4 default
pppip IP4Addr - Local end PPP IPv4
profile string - Profile name
radius string - Name for RADIUS server config to use
relay-nas-ip boolean true Pass remote L2TP endpoint as NAS IP
require-platform boolean false All sessions require a platform RADIUS
first
require-radius-acct boolean - Close session if cannot do RADIUS
accounting
retry-timeout unsignedByte 60 Interval to retry sending control messages
before fail
secret Secret - Shared secret
shutdown boolean false Refuse all new sessions or tunnels
source string - Source of data, used in automated config
management
speed unsignedInt - Default egress rate limit (b/s)
table (unsignedByte 0-99)
routetable 0 Routing table number for L2TP session
tcp-mss-fix boolean false Adjust MSS option in TCP SYN to fix
session MSS
test List of IPAddr - List of IPs to which routing must exist else
tunnel dropped (deprecated)