Doc.-No.: 01/EHTD400
Equipment Handbook
Date: 01.03.2003
TD400
Revision:
Rev. date:
Page: 30 of 40
FIREBIRD, Am Tower 16, 54634 Bitburg
18.
Next place the POD upright, with the lines
underneath, in the container. Stow the risers
alongside the reserve container so that the
toggles face towards the reserve.
19.
Turn the POD about 90° in the container. .
Make sure that the release grip is again seated
and the cable correctly positioned.
20.
The flaps of the main container should be
closed in this order: Bottom, top, right, left.
During the closing process, the kill-line of the
drogue chute should be routed out down and to
the right. Close the container with the pin. At-
tach the big Releasering with the double Loop.
Only one yellow cable through one end of the
Loop.
Stow the excess kill-line centered under the clo-
sed flaps of the main container.
21.
The Bridel should be routed through that
small corner in the pouch.
