Mounting parallel bench srew mountingsystem
10
5
6
7a
7b
5: Attach the rubber seal and tighten
Sequence: rubber seal - washer - nut
6: Set the clamping pieces to a common height and secure them
(distance from top edge of the brick to bottom edge of the clam-
ping piece approx. 20-30mm)
Sequence: Nut – clamping piece 13 – washer – nut
Cut off excess length of bench screw.
7: Align the support rails at the top and bottom and attach to the
grooved surface using the clamping pieces.
Sequence: screw - washer - clamping piece - nut
