Model # FA
-
E01
-
14
-
50
Installation and User Guide
FireAvert
helps protect your home from the leading
cause of home fires in the United States—unattended
cooking—by automatically disconnecting power to your
range or stove in the event that fire or smoke are de-
tected. FireAvert activates in response to the audible
signal of an existing smoke detector—a patented synch-
ing feature syncs to the sound signature on your specific
smoke detector—ensuring maximum reliability and
minimizing false alarms. Plug and play installation
means that FireAvert can be installed in less than 10
minutes in a few easy steps without tools or profession-
al assistance.
ATTENTION! TO ENSURE YOUR SAFETY WHILE IN-
STALLING AND USING THE FIREAVERT DEVICE, YOU
MUST READ AND FOLLOW ALL INSTURCTIONS OUT-
LINED IN THIS USER MANUAL
The FireAvert should be checked for proper function
every six months. Follow the same instructions to check
the FireAvert as used in the initial verification test.
Please see Steps 5
-
7 in the installation guide.
If the FireAvert unit enters protection mode (in event of
a fire / smoke) and disconnects power to the appliance,
follow the instructions for resetting the unit found in
this manual. Do
NOT
attempt to reset it any other way.
If at any time the device comes out of sync with the
smoke detector, as indicated by a flashing RED LED Indi-
cator and a chirping noise, you must re
-
sync the unit as
described in this manual before further use. If this prob-
lem persists, discontinue use and contact customer ser-
vice.
In the event that a new smoke detector OR range/stove
is installed in the home, the FireAvert must be reset and
re
-
synched to the new smoke detector. See
Steps 4
-
7
in the
Installation Instructions
for details.
Approved Smoke Detectors
The FireAvert is designed to work with any modern RESI-
DENTIAL smoke detector typically found in retail stores.
You should always follow the proper installation steps
and test for proper synching by running a user test with
any existing or new smoke detector. If for any reason
your smoke detector does not sync with the FireAvert
please purchase a newer smoke detector at your local
hardware store.
Approved Extension Cable
If your FireAvert does not fit and requires a pigtail ex-
tension cable you must use
Model # PT
-
E01
-
14
-
50
avail-
able from our website. FireAvert is only authorized to be
used with this designated extension cable.
Contact Us
FireAvert, LLC
www.fireavert.com
1.800.677.9870
224 S Main St. #529
Springville, UT 84663
General Warnings & Safety Instructions
Read ALL instructions BEFORE attempting to install
FireAvert. Failure to follow all instructions and warn-
ings may result in damage to the FireAvert or your
appliances, and may cause loss of property, bodily
injury or death.
NEVER attempt to install a FireAvert that appears dam-
aged or broken. IF your FireAvert appears damaged or
broken, please contact customer service for assistance.
NEVER attempt to force the FireAvert plug or receptacle
connections.
Never attempt to modify, alter, or adapt any part of the
FireAvert for use other than outlined in this User
Guide. This model of FIireAvert is designed for use with
NEMA 14
-
50 outlets and plugs ONLY.
DO NOT attempt to open the FireAvert, it contains no
user
-
serviceable components. Attempting to open or
disassemble the FireAvert voids the warranty and may
render the FireAvert inoperable.
DANGER! HIGH VOLTAGE When working with electrical
devices, basic precautions should always be followed to
prevent fire, injury
,
or death.
DO NOT
use FIREAVERT in excessively dusty, warm
(>90⁰F) or humid (>80%) environments. Dust buildup,
or excessive heat or humidity may cause malfunction or
premature failure.
DO NOT
attempt to install or remove the FireAvert unit
while the outlet is powered ON. You must switch OFF
the circuit breaker that powers the outlet before instal-
lation or removal of FireAvert.
DO NOT
pinch or squeeze the FireAvert unit between
the stove and wall outlet after installation is complete.
DO NOT
use the FireAvert without successfully pairing
it with your kitchen smoke detector and completing a
verification test. Please see Step 1 in the Installation
Guide for more details.
Orientation
1
2
3
4
5
6
1.
FireAvert Receptacle
2.
Reset Button
3.
Buzzer (Chirping Sound)
4.
LED Indicator
5.
Microphone
6.
FireAvert Plug—Male Blades
Warning!: The FireAvert is not intended to replace the
user
’
s own responsibility and good judgment in pre-
venting fires. The FireAvert aids in preventing acci-
dental unattended cooking fires in the home kitchen.
FireAvert does NOT prevent rapidly combusting fires
such as grease and oil fires, rather it is most effective
at preventing cooking fires where smoke is present for
several minutes before a fire starts.
Warranty Information
We only make those warranties found in the limited
warranty found in this package.
