7
WIRELESS INTERLINK
The W2-CO-10X is designed to be
wirelessly interlinked with up to 50
products within the Wi-Safe 2 product
range. The W2-CO-10X is not designed
to communicate with wireless alarms
from other ranges or manufacturers.
W2-CO-10X alarms need to be ‘learned-
in’ or interlinked in order to communicate
with each other. If one alarm activates, all
other interlinked alarms will also sound.
= Wireless Interlink
Wi-Safe 2 enables wireless communication
with any other product with Wi-Safe 2
technology inside. A wireless transceiver
inside every alarm communicates with
others by continuously sending and
receiving wireless signals otherwise
known as a ‘meshed network’. When one
alarm detects CO the wireless module
inside sends a radio frequency signal to
all the connected alarms, ensuring almost
instantaneous reaction across the entire
network.
How to ‘learn-in’ two wireless alarms into
a network:
Install Alarm 1 as described earlier.
Using a ballpoint pen, briefly push and
release the ‘learn button’ on the back of
Alarm 2.The red LED next to the learn
button will flash briefly then light up for
approximately five seconds.
During these five seconds you need to
briefly press the test button on Alarm 1 to
wirelessly interlink the two alarms. Alarm
1 will give an audible sound consisting of
two cycles of four loud beeps.
Summary of Contents for W2-CO-10X
Page 15: ...15 ...
