8
3 Install 9V Battery
IMPORTANT:
Before installing your
smoke alarm the battery must be
removed from the alarm and the protective
wrapper on the battery should be removed.
The battery should then be refitted. The
battery compartment has been designed
to prevent the battery being inserted
incorrectly.
CAUTION:
The horn is designed to be
loud to wake you in an emergency.
Avoid placing your ear close to the alarm
when installing battery.
Insert the battery that was provided with
the alarm making sure that the positive
and negative connections are in the correct
position, see diagram. The red LED on the
front should now flash once every 40 seconds
to show the alarm is active.
Use the fixing slots on the mounting plate
as a guide when marking the position
of the drill holes. With an appropriately
sized drill, drill the holes and insert
the plastic fixing anchors supplied
(if needed).
2 Install Mounting Plate
Fit the mounting plate to the ceiling or wall
using the screws provided.
Ensure wrapper is removed
