14
Important
If you are unable to access your FireAngel whilst in its fitted position, remove from lighting fixture and hold in hand
whilst cleaning.
Ensure the light is switched off and the bulb is cold.
Important
It is advisable to clean your FireAngel each time you replace a light bulb, always test your FireAngel to ensure correct
operation after any routine maintenance.
Warning
Your FireAngel uses mains power from the light fitting. As with normal light fittings, if your light bulb has stopped
working it may be difficult to ascertain if the electrical supply is turned off. Under no circumstances should you place
your fingers in the aperture provided to fit the light bulb in the base of the alarm. Failure to comply with this warning
may result in an electric shock.
Holding the outside of the
FireAngel casing in one
hand, gently remove the
bulb.
Hold your FireAngel in one
hand, using the soft brush
attachment of your vacuum
cleaner gently remove all
signs of dust from the cover
and ventilation holes.
Replace your FireAngel as per
the installation instructions on
page 5. Test to ensure correct
operation (see page 10).
Gently remove the FireAngel
by holding the light fitting in
one hand and the outside of
the FireAngel in the other.
