8
ASSEMBLY
7
7
7
7
Connect hose and regulator to cylinder. (The propane gas and cylinder are
sold separately.) Use a standard 20lb propane cylinder only.
Use this fire pit only with a propane vapor withdrawal supply system. See
chapter 5 of the standard storage and handling of liquefied petroleum gas,
ANSI/NFPA 58.
Your local library or fire department should have this book.
Storage of an appliance indoors is permissible only if the cylinder is
disconnected and removed from the appliance. A cylinder must be stored
outdoors in a well-ventilated area out of the reach of children. A
disconnected cylinder must have dust caps tightly installed and must not
be stored in a building, garage or any other enclosed area. The maximum
inlet gas supply pressure: 250 psi, the minimum inlet gas supply pressure:
5 psi.
The minimum hourly of 10,000 BTU is required input rating for a fire pit for
automatic operation at ratings less than full input rating. Use only the
pressure regulator and hose assembly supplied with the appliance.
The installation must conform with local codes, or in the absence of local
codes, with National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and
Propane Installation Code, CSA B 149.1, or Propane Storage and Handling
Code, B149.2.
Contact us for assistance: (866) 985-7877 | www.wtliving.com
