Version: August 2020
6
Weather Housing
•
The gas supply pipe will need to be run into the weather housing under the burner, as this is where the copper tube
with the gas supply connects to the GD14 burner.
•
The electrical supply cable will need to be run into the weather housing (must be a minimum of 1.0mm 4 core cable),
ensure 1000mm of cable is at the centre of the cavity, as this is where it will connect to the GD14 burner.
•
In order to access the gas and electrical connections inside the weather housing, it is necessary to first remove the
burner. Remove the burner by following the
‘Burner Removal Process’
of this guide.
