FIP FLS F6.61, Manual

Page: 17 / 20

17
F6.61 K-FACTOR TABLE (ONLY FOR FREQUENCY
OUTPUT)
K-Factor is the number of pulses which a sensor produces for one liter of
measured fluid. Here below all K-Factors for water at room temperature are
listed.
K-Factor values can depend on the installation conditions. K-Factor has to
divide the frequency generated by F6.61 in order to achieve the flow rate (l/s).
Please contact your dealer for K-Factor values not included in the table.
Metal Strap-on saddles
Part No.
DN/
Size
O.D.
min
O.D.
max K-Factor
SZIC080IHT 80 88 104 20,22
SZIC100IHT 100 112 126 12,99
SZIC125IHT 125 140 154 5,31
SZIC150IHT 150 168 234 3,67
SZIC200IHT 200 218 286 2,03
SZIC250IHT 250 272 344 1,31
SZIC300IHT 300 322 384 0,9
SZIC350IHT 350 425 458 0,67
SZIC400IHT 400 406 472 0,53
SZIC450IHT 450 475 516 0,4
Metal Strap-on saddles
Part No.
DN/
Size
d/R K-Factor
SZIC080IHT 80 19,02
SZIC100IHT 100 11,28
SZIC125IHT 125 4,83
SZIC150IHT 150 3,31
SZIC200IHT 200 1,95
SZIC250IHT 250 1,24
SZIC300IHT 300 0,88
SZIC350IHT 350 0,73
SZIC400IHT 400 0,54
SZIC450IHT 450
-
Metal Strap-on saddles
Part No.
DN/
Size
d/R K-Factor
WAIXHT 350 0,67
WAIXHT 400 0,53
WAIXHT 450 0,4
WAIXHT 500 0,34
WAIXHT 600 0,23
WAIXHT 700 -
WAIXHT 800 -
WAIXHT 900 -
Installation on cast iron pipes Installation on other metal pipes
Installation on cast iron pipes