7
INSTALLATION
CAUTION:
The hob SHALL not be installed below or adjacent to curtains or the like
For other combustible materials the following clearances SHALL be maintained;
- 600 mm in a vertical distance and 200 mm in a horizontal distance
4) FIXING THE COOKTOP
The hot plate has a special seal which prevents liquid from getting into the cabinet. Strictly comply
with the following instructions in order to correctly apply this seal:
Detach the seals from their backing, checking that the transparent protection still adheres to the seal itself.
Overturn the hot plate and correctly position seal “E” (fig. 10) under the edge of the hot plate itself, so that
the outer side of the seal perfectly matches the outer edge of the hot plate. The ends of the strips must fit
together without overlapping.
Evenly and securely fix the seal to the hot plate, pressing into place with the fingers and remove the strip
of protective paper from the seal and set the plate into the hole made in the cabinet.
The prospective walls cutout that exceed the working table in height must be at a minimum distance from
the cutting as mentionned both in the columns and the scheme.
In order to avoid accidental touching of overheated bottom of the hob, during operation, it is necessary to
put a wooden insert, fixed by screws, at a minimum distance of 50 mm from the top (see fig. 8).
5) LOCATION AND VENTILATION
Ventilation must be in accordance with AS5601/AG 601 – Gas Installations.
In general, the appliance should have adequate ventilation for complete combustion of gas, proper flueing
and to maintain temperature of immediate surroundings within safe limits.
6) GAS CONNECTION
Before connecting the appliance, check that the values on the data label affixed to the underside
of the cooktop correspond to those of the gas mains in the home.
A label on the appliance indicates the regulating conditions, type of gas and working pressure.
WARNING
A gas hob must only be connected by Licensed Authorised Person and in accordance with the
Standard AG601/AS5601 - Gas installation
This Gas Hob is NOT recommended for Maritime use.
* This appliance is suitable for a flexible connection;
- Natural Gas Fittings;
Regulator supplied, isolating valve and union are to be fitted.
- L.P.G. Propane Fittings;
Test point adaptor, isolating valve and union are to be fitted
•
•
•
•
•
•
•
Fig.10
Fig.11
