Fiorenzato | Cod. DISP_PRO_001 Ed. 11/2020
22 / 24
EN
Device
Mobile grinder replacement
•
With a hex wrench (CH13) block the rotor of the
mobile grinder.
•
Unscrew the three fixing screws (Item 1) using an
appropriately sized slotted screwdriver.
•
Remove the worn mobile grinder (Item 2) from its
seat (Item 3).
•
Carefully clean the seat of the grinder using a dry
and sanitised brush or a soft, dry cloth, being sure
to remove any residues or coffee dust from the
threaded holes.
•
Position and secure the new grinder in the grinding
chamber seat and, blocking the movement of the
rotor with the hexagonal key, lock it in position with
the relative fixing screws.
ATTENTION: When removing and fixing the
screws, be careful not to damage them.
1
2
3
Machine and function reset
•
Refit the removable chamber in the machine body
and lock it in place with the levers.
•
After replacement, command “Reset Grinder” from
the “SETTINGS” menu and confirm.
•
Upon command, the parameter will be reset to the
maximum value set by default.
4 ANOMALIES - CAUSES - REMEDIES
The following table shows the possible anomalies that can cause the coffee grinder
equipped with the “PRO” device to fail or not work properly. For each anomaly, the
possible cause that generated it and the actions to be taken to restore correct functioning
of the appliance are indicated.
Note: For anomalies that may cause incorrect (or non-functioning) operation of the
coffee grinder not strictly connected to the presence of the “PRO” device, refer to the
installation, use and maintenance manual of the coffee grinder in your possession.
