SAFETY
UFB 28 NEW
3.4. OPERATORS’ QUALIFY
The below specs shows the qualify requested from the operators depending on the kind of maintenance to
be done on the machine.
OPERATION
OPERATORS’ QUALIFY
Driving/control of the machine
Trained operator
Installation/ disinstallation
Fiorentini technician
Mechanical parts maintenance
Fiorentini technician
Electric parts maintenance
Fiorentini technician
Cleaning maintenance
Trained operator
Dismantling and demolition
Fiorentini technician
FIORENTINI S.r.l. suggests to train the operator before using the machine. The operator also must be
trained about safety rules and carefully read this manual.
FIORENTINI S.r.l. is not responsible for any possible damage to people and/or things caused by
the non-observance of the instructions dealt within this manual.
3.5. PROTECTION AND WARNING DEVICES
•
It is absolutely forbidden to tamper or disconnect safety and warning devices while
the machine is working;
•
It is important to check periodically safety and warning devices
Central brush
protection
Fiorentini UBF 28 NEW is equipped with a central nylon brush which rotates
when the machine is working. The central brush is protected on both sides by
a stainless steel panel and two cases which avoid the contact with dangerous
components. These protection devices can be only willingly removed from the
machine.
