SAFETY
MINISWEEPER
Rev. 00 del 05/07/04
13/33
3.6 SAFETY DEVICES
The machine is equipped with the following safety devices.
Socket
(picture 3.1), the same socket used for the battery charger. In case of emergency, this
socket must be taken away from the plug by means of its handle.
The operator must be trained about safety rules. Do never restore this safety system before the
problem has been sorted out. If it is necessary ask for the technician help.
Disconnect in case of emergency
3.7 SAFETY DIAGNOSTIC SYGNALS
The Mini Sweeper is equipped with a system that shows all errors noticed from the electronic cards, that
controls all machine functions. These errors are
displayed on the battery charge indicator, placed on the
dashboard, in the form of rapid flashes.
No. of
flashes
Description
Solution
1
Forward command already active when switching on
the machine: the start key has been turned on with the
forward command already entered.
Release the forward commande in
order to stop this sygnal. If this does not
stop it might be necessary to set the
acceleration system again.
2
Battery too low or under tension, caused by a short
circuit on the power. It means that the tension read
from the system is lower than the minimum threshold
needed for the correct machine functioning and that
the version of system is not compatible with the
battery installed. In different case, replace the system.
Verify that the battery is not too low, if
so, recharge it.
Alternatively, check that all electric
connections are well fixed. If the
problem is not solved it might be
necessary to replace the complete
system.
PICTURE 3.1
