FIORENTINI JOLLY 17, Instruction Manual

Page: 8 / 24

8
HANDLE GRIPS. WHEN TRANSPORTING OR STORING MACHINE, RAISE HANDLE TO
VERTICAL POSITION.
MAINTENANCE OF MACHINE
WARNING: MAINTENANCE SHOULD BE PERFORMED BY QUALIFIED PERSONNEL ONLY.
Lubrication: your machine has been completely lubricated at the factory before shipment to you.
The gear unit is lubricated for 2 or 3 years (for normal work).
CARE OF SCRUB AND POLISH BRUSHES
Always remove brush from the machine when not in use. Brushes should be kept in a cool dry place as
excessive heat will warp and crack backing.
Extension cord: your machine has been equipped with 15 meters of cable. Should additional cable be
needed, use a larger size wire and always 3 wires.
Replace worn, cut or frayed electrical cables.
The Floor Maintener can be converted to many different uses. Following are the different types of brushes
available:
1) BASSINE BRUSH
2) NYLON BRUSH
3) NYLON-STEEL BRUSH
4) STEEL BRUSH
5) MOQUETTE BRUSH
6) PAD HOLDER
7) SYNTETIC PAD
It is possible to have also the solution tank for automatic solution feed.
TECNICAL CHARACTERISTICS
POWER
1100W
PROTECTION CLASS 1
LENGTH OF CORDS 15 m
BRUSH SIZE 430 mm
BRUSH 150 rpm
ENERGY SOURCE network current
VOLT 230 V
WEIGHT 38 Kg
DECIBEL 65 dB