EN
13
For clarity of representation, the figure shows
screws 1 and 2 without the pulleys and belts
mounted. Of course you must unscrew them
without removing them.
The tension can be adjusted by screwing or
unscrewing the belt tensioner. Once you have
found the optimal value, retighten the screws 1
and 2 and the lock nut.
Similarly, the belt tensioner C and screws 3
allow you to adjust the fan belt tension.
The correct belt tension values are:
-
Fan. 390 Newton per branch.
-
Pumps. 300 Newton per branch.
-
Dynamo. 65 Newton per branch.
7 Disposal
9 Accessories and Spare Parts
Only use accessories and spare parts
approved by the manufacturer. Original
accessories and spare parts guarantee that
the appliance can be used safely and without
problems.
ING. O. FIORENTINI S.p.A.
Via Piancaldoli 1896 Firenzuola 50033
Frazione Piancaldoli (FI)
–
Italy
Phone (+39) 055.81.73.610
Fax (+39) 055.81.71.44
E-mail: [email protected]
Website: www.ingfiorentini.it -
All packaging is recyclable. The
packaging must not be disposed of
with household waste, but brought to
relative collection centres.
Discarded appliances contain valuable
recyclable materials and must be
brought to relative collection centres.
Batteries, oil, and similar substances
must not be released into the
environment. Therefore please dispose
of your discarded appliances using
separate collection systems.
8 Warranty
The Ing.O.Fiorentini S.p.A. general terms
conditions also apply to the warranty.
The manufacturer cannot be held responsible in
any way for damage resulting from unauthorised
modifications made to the appliance, from the use
of unsuitable brushes and accessories and after
use of the device other than that intended.
