SUPPORT FEATURES AND SPECIFICATIONS
CS 650
Rev. 00
03/01/07
Pag. 6/25
2. SUPPORT FEATURES AND SPECIFICATIONS
2.1. IDENTIFICATION
The CARPET SWEEPER machine ca be identified with an adesive label put on the protection carter in the
backside of the machine which will clearly report the data referring to “CE” marking
The label has never to be removed and should be always kept legible. In case of
damaging it’s necessary to ask for a duplicate.The autoscrubber machine cannot be
commercialized without the label.
2.2. DESCRIPTION AND COMPONENTS
The CARPET SWEEPER machine 650 has been designed for treatment of flat areas, hard and carpets , by
a sweeping process that put the dust in a duly tank in the back of the machine. The power supply is
furnished of an accumulator batteries at 12V and the traction system is due to the brushes hinertia.
The machine is supplied with two rotating brushes: one lateral and one central. The lateral move the dust in
to the center of the machine and the main /central brush convey the dust in the tank, aspired by a fan motor.
This machine must be utilized on dry surfaces. is aspired and piped in the recovery tank.
The testboard controles some of the functions of the machine and put at the operator’s disposal a signalling
system, through lighting leds, of the remaining charge of the battery. With the testboard is possible to carry
out the following functions:
to switch on and off the machine;
to start the 2 brushes;
to select the pressure level;
to start the suction motor;
to start the filter shaker;
to check the battery level charge
Ing. O. Fiorentini SPA
Piancaldoli (FI)
MADE IN
ITALY
CE
Mod. S650 S.N.
2008
V 12
Hz.
Kg 48
A
W
FIGURA N° 2.1