background image

SAFETY 

I42 I60 TP - GB

Rev. 000 

27/11/2017 

10/34

 

3. SAFETY

3.1.   RECOMMENDED USE 

This  is  a  floor  scrubbing  machine  designed  and  built  for  use  in  industrial 
environments,  to  carry  out  wet  scrubbing,  drying  and  effluent  collection  on  flat 
horizontal  surfaces  or  surfaces  with  a  gradient  not  exceeding  10%  at  speeds  not 
exceeding 3 km/h. U-turns are prohibited on any gradient slopes.

3.2.   MISUSE 

Machine operation by unauthorised personnel;

scrubbing uneven and/or bumpy surfaces;

scrubbing sloping surfaces;

scrubbing surfaces whose gradient exceeds 10%;

doing U-turns on any (even minimal) gradient slopes;

using  the  machine  in  environments  containing  dangerous  substances,  and  in
particular, in explosive atmospheres or inadequate microclimatic conditions;

cleaning machine surfaces in the presence of flammable substances;

the  machine  may  not  be  used  as  a  means  of  transport  for  people  or  other
vehicles;

altering or tampering with safety devices;

charging batteries at not sufficiently ventilated locations;

failure to comply with applicable safety standards currently in force;

fitting equipment/devices likely to interfere with machine operation;

introducing changes or alterations not authorised by FIORENTINI;

using acid solutions likely to damage the machine;

failing to comply with use and maintenance manual specifications.

The informative labels provided on the machine should be carefully read and should 
not be covered for any reason.

 

FIORENTINI shall not be liable in any case for any of 

the above not recommended uses of the machine (instances of misuse).

 

3.3.    SUGGESTED EQUIPMENT 

To make the best use of  your machine,  equipment specially  designed and  tested by Fiorentini and original 
spare  parts  should  be  used.  The  Design  Department  of  FIORENTINI  S.p.A.  is  willing  to  meet  any  design 
requirements concerning parts and components for personalised applications. 

Summary of Contents for 142TP-GB



































Reviews: