10
Faults
Causes of faults
Unable to start up
· The power supply
port is not properly
connected
The luminance/contrast
ratio is not adjusted
Interfered
The power line is
not properly connected
Incorrect resolution
Dim images
The indicator is not lit up
and no picture is shown
The screen
displays “Out of range”
· Correctly connect the power supply line
· Long-press the power key to start up the machine
· Adjust the luminance and the contrast ratio
· Keep away from electrical equipment that may cause
electronic interference
· Please set the resolution as the recommended value in the
basic parameters
· Connect the power supply of the computer and the portable monitor
· Correctly insert into the ports of the computer and the portable monitor
· Connect the Type-C power line correctly
Solutions
Troubleshooting
Health in eye use
Low blue ray description
In order to avoid eye fatigue and neck, arms, elbows and shoulder pain caused by prolonged use of the monitor,
pay attention to the following points in use:
1. Keep your eyes 20 to 28 inches (about 50-70 cm) from the monitor screen.
2. In using the monitor, you are recommended to increase blinking frequency to relieve eye fatigue.
3. Please take a rest for 20 minutes every two hours.
4. While you are at rest, take your eyes away from the monitor and look at a distant target for at least 20s.
5. While you are at rest, you can stretch to soothe the neck, arms, back and shoulders.
Basic parameters
Screen size
Speaker
Refresh rate
FreeSync
Color gamut
Display color
Static contrast ratio
Interface
Overall dimensions
Product thickness
Touch control or not
Screen type
Resolution
Luminance
Net weight
Input voltage
Ambient temperature
Product code
Product name
11
15K3F-C
Not supported
2*1W
60Hz
None
45%NTSC
16.7M (6BIT+FRC)
800:1
Type-C*2 and Mini HDMI*1
373.2*236.8mm
990g
220cd/m
2
15.8 inch
DC 20V 1.5A/
15V 2.0A/
12V 2.5A/
9V 3.0A
0°C~45°C
IPS
1920*1080P
9.4mm
15.8-in portable monitor
Jumping image or ripple
screen
In recent years, the damage caused by blue rays to the eyes has attracted more and more attention.
Generally, the wavelength of blue rays is 400-480nm and the wavelength of harmful blue rays is 415-455nm.
This monitor has the function of reducing blue ray emission and the user can enable the low blue ray mode of
this monitor through menu settings.
